Skip to content
10% off Chevy headlights through February 2024
10% off Chevy headlights through February 2024

Country

H11/H9/H8: Xtreme LED Pro - Yellow (Pair)

SKU XD.LED041
Original price $112.50 - Original price $112.50
Original price $112.50
$112.50
$112.50 - $112.50
Current price $112.50

Xtreme LED Pro: Xtreme LED Pro series of drop-in fog light bulbs are just better--right from the start. They incorporate today's most advanced components and features for unparalleled compatibility and performance. Hold one in your hand and you'll immediately discern their uncommonly high-quality fit, finish, and feel: they're made of premium materials, formed and assembled with precise craftsmanship. Optimal Heat Dissipation: The next thing you'll notice is their all-new patented aluminum alloy leaf passive heat sink. Its compact and readily configurable design allows an easy fit in most any fog lamp housing, and with its much larger contiguous thermal path, it does a better job shedding heat off the LEDs than past-type flexible mesh heat sinks. With no flex-mesh junctions to break and no motorized fans to make noise and electrical interference, clog, or fail, the superior heat rejection performance of the alloy leaf passive heat sink is retained over the long haul, for the full rated life of the emitters. That translates directly to excellent performance; the cooler LEDs can be kept, the higher their output. Beam Pattern: The emitters themselves are genuine Lumileds ZES, three on each side of the light head, and this together with their undomed configuration means they closely replicate the size of the original halogen filament. That means a better optical match than longer 4-emitter arrays or domed COB emitters, both of which violate the light source box your fog lamp's optics were designed around, and because the high output comes from three chips rather than four, luminance is higher for better beam punch and spread. Lumens and Light Output: Anyone can throw around inflated lumen numbers--and most vendors do. Some of those numbers have no basis in reality, they're just fibs. Some of them are somewhat accurate, but only immediately after the bulb is lit up in a cold chamber, without accounting for the significant 'droop' that happens when improperly chosen emitters are inadequately cooled--don't drink the kool-aid! The Xtreme LED Pro bulbs are rated honestly: 1750 lumens stable, measured after the bulbs have been operating continuously for an hour in 60C heat. That's a rating that means (and gives you) exactly what it says. With the 5500K color temperature of our emitters, we're giving you true white light, not artificially jacking up the lumen rating with a bunch of useless deep-blue light that can only attract unwanted police attention, not help you see. In Summary, They're Just Better: There's more clean-sheet engineering where you can't see it: we've used copper circuit boards for optimal thermal conductivity, and our compact base means the rigid tail of the light head is only 25mm--much smaller than other LED bulbs on the market. You'll note the light head is remarkably compact, without bulky over-length that prevents many other LED bulbs from fitting all the way into many fog lamps. And the light head is clockable, too, so you can fine-tune the output for the best optical match with any lamp you might install them in. Truly, this is the top-performing LED bulb with OE-level quality and "fit it and forget it" durability and dependability.

Xtreme LED Pro: Xtreme LED Pro series of drop-in fog light bulbs are just better--right from the start. They incorporate today's most advanced components and features for unparalleled compatibility and performance. Hold one in your hand and you'll immediately discern their uncommonly high-quality fit, finish, and feel: they're made of premium materials, formed and assembled with precise craftsmanship. Optimal Heat Dissipation: The next thing you'll notice is their all-new patented aluminum alloy leaf passive heat sink. Its compact and readily configurable design allows an easy fit in most any fog lamp housing, and with its much larger contiguous thermal path, it does a better job shedding heat off the LEDs than past-type flexible mesh heat sinks. With no flex-mesh junctions to break and no motorized fans to make noise and electrical interference, clog, or fail, the superior heat rejection performance of the alloy leaf passive heat sink is retained over the long haul, for the full rated life of the emitters. That translates directly to excellent performance; the cooler LEDs can be kept, the higher their output. Beam Pattern: The emitters themselves are genuine Lumileds ZES, three on each side of the light head, and this together with their undomed configuration means they closely replicate the size of the original halogen filament. That means a better optical match than longer 4-emitter arrays or domed COB emitters, both of which violate the light source box your fog lamp's optics were designed around, and because the high output comes from three chips rather than four, luminance is higher for better beam punch and spread. Lumens and Light Output: Anyone can throw around inflated lumen numbers--and most vendors do. Some of those numbers have no basis in reality, they're just fibs. Some of them are somewhat accurate, but only immediately after the bulb is lit up in a cold chamber, without accounting for the significant 'droop' that happens when improperly chosen emitters are inadequately cooled--don't drink the kool-aid! The Xtreme LED Pro bulbs are rated honestly: 1750 lumens stable, measured after the bulbs have been operating continuously for an hour in 60C heat. That's a rating that means (and gives you) exactly what it says. With the 5500K color temperature of our emitters, we're giving you true white light, not artificially jacking up the lumen rating with a bunch of useless deep-blue light that can only attract unwanted police attention, not help you see. In Summary, They're Just Better: There's more clean-sheet engineering where you can't see it: we've used copper circuit boards for optimal thermal conductivity, and our compact base means the rigid tail of the light head is only 25mm--much smaller than other LED bulbs on the market. You'll note the light head is remarkably compact, without bulky over-length that prevents many other LED bulbs from fitting all the way into many fog lamps. And the light head is clockable, too, so you can fine-tune the output for the best optical match with any lamp you might install them in. Truly, this is the top-performing LED bulb with OE-level quality and "fit it and forget it" durability and dependability.

Shipping - All products purchased from Performance Automotive Lighting are giving a tracking number once the order has shipped and are insured through the carrier, included within total shipping costs. All orders are fulfilled within 1-3 business days of being placed, however this may be extended during peak seasons or holidays. Some products purchased from our store may require additional manufacturing lead time, which will receive additional communication regarding expected fulfillment.

Occasionally parts ordered through our site are shipped directly from the manufacturer, which may result in multiple packages arriving for a single order. In this case, tracking numbers for each package will be provided once orders are fulfilled.

Lost Packages – if tracking information shows that the package has been delivered and you have not received your package, you must notify the carrier immediately and notify us within 21 days of the marked delivery date so we can work with the carrier on recovering the package. Please note that this is generally the policy of the carrier and that credit is not always issues by the carrier until the process is complete. Unless insurance is selected at checkout, replacement parts or refunds will not be processed until the carrier approves the claim.

Product Returns - Performance Automotive Lighting is not responsible for return postage unless the return is required due to our mistake, in which case a pre-paid label will be provided. Due to the nature of many of the products sold on our site, we do not accept returns or exchanges on custom parts, un-sealed HID bulbs, used/installed products, or items purchased from our clearance section. Select returns are subject to restocking fees, outlined below.

Perfect condition (Unopened & like-new) = 90% refund or 100% store credit.

Re-conditioned (Packaging opened or damaged) = 80% refund or 90% store credit.

Inability to restock (Product & packaging both damaged) = 70% refund or 80% store credit.

Refunds

If you return an item for a refund, it must first meet the criteria stated in our above returns policy. All returns must be received at Performance Automotive Lighting within 45 days from their original purchase date. All refunds must be issued back to the original payment source. After 45 days from the original purchase date but within 90 days, we can submit refunds only by store credit or check. After 90 days, we can only provide refunds as store credit. If an order is placed using store credit; and that order requires a refund, the store credit will be re-applied to your account. This policy shall apply to any product purchases or deposits. 

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. 

Gift card is a non-returnable item.

To complete your return, we require a receipt or proof of purchase. 
Please do not send your purchase back to the manufacturer. 

Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. 

If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days. Original shipping costs are not refundable.

Custom Build Cancellations - Orders that are requested to be cancelled before the build is complete are subject to a 25% cancellation fee, based on the total of the build  This fee is used to compensate for parts that are ordered for the build and time/labor spent on the project prior to cancellation. If an order is cancelled and the build has been started, customer is responsible for paying the 25% cancellation fee as well as for the work has been done determined by Performance Automotive Lighting

Exchanges – We are happy to exchange parts that are in like-new condition with original packaging, as long as exchanges are made within 60 days of the original purchase date. If you wish to exchange a product that is not in like-new condition, we reserve the right to deny an exchange or provide partial store credit towards your new items. product.